Crane Fleet from 25 to 770 tons
Roofing And Rooftop Lifts
Coordinated Around Roof Access
Aero handles roofing and rooftop crane work across Connecticut and the Northeast. Material loading, mechanical placements, and tear-off support coordinated around your roof access plan and the building below.
Operated Crane Service | Rigging | Hauling & Storage
Compliant with industry standards.
Roofing And Rooftop Crane Services
Crane Rentals For Roofing Contractors And Building Owners
Roofing work needs cranes that can clear parapets, reach back deck areas, and stage materials without disrupting the building below. Aero brings operators who plan around setup access, rigging plans built for the load, and coordination with the roofing crew so material lands where the install begins.
Roofing Material And Equipment Loading
Rooftop Mechanical Placements
Tear-Off And Debris Lifts
Our Experience With Rooftop Crane Work
Aero supports commercial roofing contractors, mechanical contractors, and building owners across the Northeast. Our crews understand how rooftop work depends on the parking lot, the parapet height, and the building's daily activity below.
Operated crane, rigging, hauling, and storage all run through one Aero team. The crew that books the lift also handles the rig plan, the transport, and the staging.
Aero crews dispatch from South Windsor across Connecticut, Rhode Island, western Massachusetts, and southern Vermont. Equipment is matched to the site distance, road access, and lift requirements before the crane leaves the yard.
The fleet spans 25-ton carry decks to 770-ton all-terrain Liebherrs, with boom trucks, truck cranes, and forklifts in between. Each crane is matched to the load, the site access, and the schedule of your job.
Coordinated Before The Roof Crew Arrives
Rooftop work runs on access. Here is how Aero plans around your building.
Confirm Building And Roof Access
Tell us the building, the parapet height, and the parking lot setup. We confirm crane reach, ground bearing, and the lift sequence around the building's traffic.
Match The Right Crane And Reach
Sized to clear parapets, reach back deck areas, and lift roofing material loads without overreach. Smaller cranes for tight setups, larger AT cranes for back-roof access.
Coordinate With Roofing Crew
We sync with the roofing foreman so material loading lands where the install starts and tear-off staging matches the dumpster plan.
Execute And Close Out
Operators on site, lifts complete on schedule, parking lot back to your client without disruption to the building below.
Roofing Crane Services Across The Northeast
Aero plans every rooftop lift around your building access and the roofing crew's schedule. Talk to us about your next material loading or rooftop placement project.
Roofing Crane Questions
Common questions about roofing and rooftop crane work.
Material loading for new and replacement roofs, rooftop mechanical and HVAC placements, tear-off and debris lifts, and back-deck work that requires reach over the building. Commercial flat roofs are our most common, but we also support mansard, sloped, and architectural roofing as needed.
Lifts are planned around the building's traffic and operating hours. Setup happens before the day starts when possible, ground crew controls parking lot access during lifts, and we coordinate with property management on tenant or customer impact.
Yes. We size from your site survey. Larger all-terrain cranes can reach over the front of buildings to back-roof areas where parking lot access is the only setup option. We confirm reach and load chart capacity from your roof plan.
Smaller cranes for tight parking lots, 55-ton through 230-ton all-terrain cranes for taller buildings and back-roof reach. Boom trucks for material loading on smaller jobs. We size from your roof access constraints.
One to two weeks for standard material loading and mechanical placements. Larger projects with permit or street closure needs benefit from three weeks of lead time. Emergency rooftop work can sometimes be turned around in 48 hours.
Our Services
We handle every part of the lift workflow: operated crane service, rigging, hauling, and storage. Tell us about your project and we'll match the equipment, plan the setup, and lock in the schedule.
Operated crane service,
planned and dispatched
We bring the crane, the operator, and the lift plan to your site. Every job is mapped at our yard before the equipment ships, so the crew arrives ready to work.
Rigging coordinated
with the lift plan
Our rigging team works alongside the operated crane crew. Slings, shackles, spreader bars, and tag lines are matched to the load before the lift starts.
Heavy haul
from yard to jobsite
We move equipment, structures, and oversize loads on flatbeds and lowboys across our service area. Routes are planned for permits, clearances, and the schedule of the lift on the other end.
Yard storage
between project phases
When equipment or materials need to wait between phases, our South Windsor yard offers secure storage with re-mobilization built into your schedule.
Cranes and equipment from 25 to 770 tons
Cranes for
Every Kind of Lift
We run all-terrain cranes from 110 to 770 tons, plus boom trucks, truck cranes, carry decks, and forklifts. Each piece of equipment is inspected, maintained, and sized to your project before it ships from the yard.
All-Terrain Cranes: 110 to 770 tons
Boom Trucks: 45 to 55 tons
Truck Crane: 60 tons
Carry Deck: 25 tons
Get a quote on your next lift
Send us the load, the site, and the date. We'll respond with the right crane, the right schedule, and a planning call to lock it in.
Tell us the load weight, the site address, and the date you need a crane.
We confirm the load, walk the site if needed, and match the right crane to the job.
We lock in the schedule, send the rig plan, and dispatch from the yard.